KISAE SW1204 Manuel d'utilisation et d'entretien télécharger pdf

True Sinewave Power Inverter

SW 1204 series

Modified Sinewave Power Inverter

MW 1204 series

Owner’s Manual

For safe and optimum performance, the Power Inverter must be used properly. Carefully read and follow all

instructions and guidelines in this manual and give special attention to the CAUTION and WARNING

statements.

PLEASE KEEP THIS MANUAL FOR FUTURE REFERENCE

Disclaimer

While every precaution has been taken to ensure the accuracy of the contents of this guide, KISAE

Technology assumes no responsibility for errors or omissions. Note as well that specifications and

product functionality may change without notice.

Important

Please be sure to read and save the entire manual before using your KISAE Power Inverter. Misuse

may result in damage to the unit and/or cause harm or serious injury. Read manual in its entirety before

using the unit and save manual for future reference.

Product Numbers

True Sinewave series

SW 1204 120V 400W true Sinewave power inverter with USB port

SW 1204i 230V 400W true Sinewave power inverter with USB port

Modified Sinewave series

MW 1204 120V 400W modified Sinewave power inverter

Thank you for purchasing the KISAE Power Inverter. With our state of the art, easy to use design, this

product will offer you reliable service for providing AC power for your home, cabin, RV or Trailer. The

KISAE Power Inverter can run many AC-powered appliances when you need AC power anywhere.

This manual will explain how to use this unit safely and effectively. Please read and follow these

instructions and precautions carefully.

IMPORTANT SAFETY INFORMATION

This section contains important safety information for the KISAE Power Inverter. Each time, before

using the KISAE Power Inverter, READ ALL instructions and cautionary markings on or provided with

the inverter, and all appropriate sections of this guide.

The KISAE Power Inverter contains no user-serviceable parts. See Warranty section for how to handle

product issues.

WARNING: Fire and/or chemical burn hazard

• Do not cover or obstruct any air vent openings and/or install in a zero-clearance compartment.

WARNING: Failure to follow these instructions can result in death or series injury

• When working with electrical equipment or lead acid batteries, have someone nearby in case of an

emergency.

• Study and follow all the battery manufacturer’s specific precautions when installing, using and

servicing the battery connected to the inverter.

• Wear eye protection and gloves.

• Avoid touching your eyes while using this unit.

• Keep fresh water and soap on hand in the event battery acid comes in contact with eyes. If this

occurs, cleanse right away with soap and water for a minimum of 15 minutes and seek medical

attention.

• Batteries produce explosive gases. DO NOT smoke or have an open spark or fire near the system.

• Keep unit away from moist or damp areas.

• Avoid dropping any metal tool or object on the battery. Doing so could create a spark or short circuit

which goes through the battery or another electrical tool that may create an explosion.

WARNING: Shock Hazard. Keep away from children!

• Avoid moisture. Never expose unit to snow, water etc.

• Unit provides 120 VAC, treat AC output sockets the same as regular wall AC sockets at home.

WARNING: Explosion hazard!

• DO NOT use the KISAE Power Inverter in the vicinity of flammable fumes or gases (such as propane

tanks or large engines).

• AVOID covering the ventilation openings. Always operate unit in an open area.

LIMITATIONS ON USE

Do not use in connection with life support systems or other medical equipment or devices.

1. INTRODUCTION

SW1204 Series

MW1204 Series

Service Contact Information

Email: info@kisaetechnology.com

Phone : 1 604 320-7857

Web : www.kisaetechnology.com

The KISAE Power Inverter package includes the items list below.

• Power Inverter base unit

• Owner’s manual

• DC Input cable accessories

WARNING: KISAE Technology recommends that all wiring be done by a certified technician or electrician

to ensure adherence to the applicable electrical safety wiring regulations and installation codes. Failure to

follow these instructions can damage the unit and could also result in personal injury or loss of life.

CAUTION: Before beginning your power inverter Installation, please consider the following:

• The KISAE Power Inverter base unit should be used or stored in an indoor area away from direct sunlight,

heat, moisture or conductive contaminants.

• When placing the unit, allow a minimum of three inches of space around the unit for optimal ventilation.

Understanding the unit features

SW1204 series: MW1204 series:

2. PRODUCT DESCRIPTION

3. INSTALLATION

Power Inverter

SW1204

MW1204

LOADS

Pos +

Neg -

Disconnect

Switch

Fuse or Circuit

Breaker

12 V Battery Bank

(Charger system

sold separately is

required to charge

the battery bank

when battery is

discharged)

Material Prepare for Installation

Typical Wiring block diagram of the Power Inverter:

12V Battery Bank:

• The use of deep cycle battery is highly recommended for power inverter application

• For battery size, you need to identify how much you will be using them between charges. KISAE do

recommends you purchase as much battery capacity as possible. See more on Battery Run time and

Load in Section 4.

Fuse or Circuit Breaker:

• DC-rated fuse or DC-rated circuit breaker connected along the DC positive line is required.

• Select a fuse or circuit breaker with a minimum of 60 ADC.

• Based on the size of the battery bank chosen on the 12V Battery Bank above, determine the overall

short circuit current rating of the battery bank from the battery manufacturer. The fuse or circuit

breaker chosen has to be able to withstand the short circuit current that may be generated by the

battery bank.

Disconnect Switch:

• Select a Disconnect Switch with the same or higher the rating of the selected fuse or circuit breaker

from the above.

• The Disconnect Switch is used to disconnect the DC power between the power inverter and the

battery bank during service, maintenance or trouble shooting.

DC Input Cable:

• Use of low resistance wire is required for all the DC connections between the inverter and the battery

bank.

• Uses minimum #10 AWG wire with maximum cable length of 5 feet.

Installing the Power Inverter System

WARNING: Electrical Shock Hazard

The unit ‘On/Off’ switch does not disconnect the DC power from the battery. Use the DC Disconnect Switch

or disconnect the DC input cables connection to disconnect the DC power from the battery before working

on any circuits connected to the unit. Failure to follow these instructions can result in death or serious injury.

CAUTION: Reverse the DC Input terminal will damage the unit and cannot be repaired. Damage caused

by reverse polarity connection is not covered by the warranty.

Power Inverter Installation (SW1204 series only):

• Choose an appropriate mounting location.

• For indoor use, the orientation of the unit can be mounted in any direction except with the DC Input

panel facing downwards.

• For RV installation, the unit has to be mounted flat on horizontal surface.

• Use mounting template below to mark the positions of the mounting screws.

• Drill the 4 mounting holes and place the inverter in position and fasten the inverter to the mounting

surface.

‘Power’ indicator

‘Fault’ indicator

USB

On/Off Switch

Fan

opening

DC Input

Terminals

147.0mm

161.0mm

EU 230V 120V AU 230V UK 230V

Picture shown

SW1204 series

1 2

Résumé du contenu

Page 1 - Owner’s Manual

True Sinewave Power InverterSW 1204 seriesModified Sinewave Power InverterMW 1204 seriesOwner’s ManualFor safe and optimum performance, the Power Inve

Page 2 - GFCI Duplex

Power Inverter DC Input Connection:• Connect one end of the negative DC input cable to the Power Inverter DC negative terminal (black). Conn

Commentaires sur ces manuels

Pas de commentaire

KISAE SW1204 Manuel d'utilisation et d'entretien

Naviguer en ligne ou télécharger Manuel d'utilisation et d'entretien pour Adaptateurs et onduleurs de puissance KISAE SW1204. KISAE SW1204 Use and Care Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Adaptateurs et onduleurs de puissance KISAE SW1204